The disposer will grind almost all items of food waste. Naturally, some items require less time to grind than others. Items such as animal fat, skin and hard bones take longer to grind than vegetable parings. Mixing different types of waste will improve grinding efficiency. Food wastes are fed into the disposer through the sink drain opening. The wastes fall into the grinding mechanism and are shredded into particles small enough to be floated away by the water.
Description:
The disposer will grind almost all items of food waste. Naturally, some items require less time to grind than others. Items such as animal fat, skin and hard bones take longer to grind than vegetable parings. Mixing different types of waste will improve grinding efficiency. Food wastes are fed into the disposer through the sink drain opening. The wastes fall into the grinding mechanism and are shredded into particles small enough to be floated away by the water.
Features:
- 3/4 Horsepower Motor
- Super Capacity Continuous Feed Disposer
- Over 3,100 RPM Grinding Action
- Stainless Steel Jam Resistant, Dual Swivel Impellers
- EZ Mount Installation
- Direct Wire Power Connection
- Sound Reduction Technology
- ColdRolled Carbon Steel Armature Shaft Material
- SplashGuard
- Wall Switch with Sink Stopper
- Manual Reset Overload Protector
- Dishwasher Drain Connector
- Stainless Steel Sink Flange
- Stainless Steel Turntable
- 2 Level Precutter
Specifications:
- Unit Capacity: Super
- Motor Horsepower: 3/4 HP
- Mounting Type: EZ Mount
- Control Type: Wall Switch
- Feed Type: Continuous
- Impellers: Dual Swivel; Jam Resistant; Stainless Steel
- Armature Shaft Material: Cold-Rolled Carbon Steel
- 2 Level Precutter: Yes
- Drain Connector: Yes
- Drain Elbow: Yes
- Manual Reset Overload Protector: Yes
- Sink Stopper: Yes
- Splash Guard: Non-Removable
- Grinding Speed: Over 3,100 RPM's
- Turntable Material: Stainless Steel
- Quiet Package: Sound Reduction Technology
Power / Ratings
- Power Connection: Direct Wire
- Volts: 120V
- Hertz: 60Hz
- Amps: 6.0A
Dimensions and Weights
- Overall Width: 8 1/2"
- Overall Height: 14 1/2"
- Dishwasher Inlet Diameter: 3/4"
- Drain Outlet Diameter: 1 1/2"
- Net Weight: 11 Lbs.
- Approx. Shipping Weight: 13 Lbs.
This item is brand new and comes with a full manufacturer warranty. Please refer to the table below for details
 |
Warranty Center |
Don't Gamble on a break-down!
Membership Benefits:
|
- 100% Parts and Labor
- No Deductibles
- No Lemon Guarantee
|
- Fully Transferable
- Toll-Free Support
- Worry Free For Up to 5 Years
|
- Nationwide Coverage
- Rapid Claim System
- Electronic Registration
|
| Coverage/Features |
Extended Service Plan |
Typical Manufacturer Warranty |
Coverage Length |
Up to 5 Years including parts and labor |
1 Year Parts, 90 Days Labor |
Wear and Tear(Normal Use) |
 |
- |
Product Replacement (If Product Cannot be Fixed) |
|
- |
Power Surges |
|
- |
Optional Accidental Damage |
|
- |
Screen or Lens Replacement |
|
- |
Worldwide |
|
- |
Transferrable |
|
- |
24/7 Toll Free Help |
|
- |
No Lemon Policy |
|
- |
Authorized Service Centers in Most Locations |
|
- |
What exactly is an Extended Service Plan?
An extended service plan is generally an extension of your original manufacturer's warranty. Most manufacturers warranty their products to be free from defects for up to one year from the date of purchase. This warranty virtually guarantees you that if your newly purchased product fails, the manufacturer will protect you from the high costs of replacement parts and labor necessary to repair your product. Extended service plans lengthen your product's coverage for up to an additional 60 months (5 years) to insure you get years of performance satisfaction from your newly purchased product.
How is this different than the manufacturer's warranty?
A manufacturer's warranty usually offers limited coverage for a limited time, with parts and labor carrying separate lengths of coverage. For example, a common manufacturer warranty of a product might cover a consumer for one full year on parts defects but only 90 days on the high cost of labor involved to change those parts. Extended service plans provide comprehensive, long term, even length coverage. This means that should your product fail within your plans coverage time frame, both parts and labor costs are covered.
How do I buy an Extended Service Plan?
Extended Service Plans can be purchased along with your product online, or via our toll free number.
Can I renew my Consumer Priority Service extended service plan?
Yes, service plans are renewable and must be submitted 30 days prior to the original plans expiration. Please contact a sales representative to discuss your renewal options.
What should I do if I need extended service?
Our extended service providers offer an easy to use interactive form online which you may use to request that they initiate a claim on your product. Your other alternative is to call the toll-free number on your extended warranty card or email and have a qualified representative make this request for you with the information you will provide. We believe that our claim initiation request process is the absolute best our industry has to offer. It is designed for simplicity and speed.
Who will perform the service on my product?
Our company works with over 11,000 authorized service professionals. Each technician is extensively trained by the respective manufacturers to provide service on your products. Authorized technicians must complete annual and bi-annual continued education exams in addition to being well versed in manufacturer supplied update bulletins to ensure their level of expertise is as current as the new products which come to market. We urge our customers to provide feedback regarding their experiences which we later use to insure that the level of service we are expected to provide is exactly the level of service you receive.
May I transfer my extended service plan to another person?
Our service plans are 100% transferable. If you would like transfer ownership of the covered product along with its coverage, we require that the request be supplied in writing. For assistance please contact a Representative. Please have all of the new owner's information at hand when requesting a transfer.
Will I have to pay a deductible or any other "hidden costs"?
Generally, the amount of a deductible is almost always proportional to the amount of the premium charged. In order to have a lower deductible, even as low as $0, the plan holder would generally have to agree to a higher premium. For those who want lower premiums, they must agree to a higher deductible. Our extended service plans carry a $0.00 deductible along with low premiums. This means that with an extended service plan there are no high upfront costs and they are committed to cover 100% parts and labor costs on any authorized claim.
You will need Adobe Acrobat Reader to view and print pdf files.
